Install TP-Link Router on Linux

Install on a router graphic

Introduction

This document contains a step-by-step process for installing the Commotion software on TP-Link routers. If you have a new, in-the-box TP-Link device, this guide is for you.
We have written this guide because the Open Technology Institute is expanding Commotion router software support for TP-Link routers. The software is an alternative operating system, similar to Linux for your home or office computer. TP-Link hardware comes from the factory installed with their custom software – just like a new computer usually comes with Microsoft Windows or Mac OSX installed. Installing Commotion on your router instead will add new features to your router, including the ability to mesh with other routers that use Commotion.
The installation process should take about 15 to 30 minutes. If these steps do not work for you, or if you have a router that failed to properly flash Commotion or will not respond in any way, then please see the Extra Resources section.

Materials + Supplies Needed

To install Commotion, you will need the following items on-hand:
  1. A computer with an Ethernet port.
  2. The TP-Link router and its power supply.
  3. Access to a power outlet.
  4. One Ethernet cable.
  5. An Internet connection or the appropriate Commotion software image.

Download Commotion

Download “Factory” Commotion image for your hardware:
https://commotionwireless.net/download/routers
Make sure the TP-Link router model number and version match exactly. For example, the Commotion image for the WR842ND V1 will not work on the WR842ND V2!
Save the file somewhere you can access easily later. A good place to save the file is on your Desktop, or in your Downloads directory.

Setup the Hardware

  1. Unpack the TP-Link router and screw on the external antennas (if the unit has them).
  2. Turn off your computer’s Wi-Fi, if it is on.
  3. Plug the Ethernet cable into one of the switch ports (usually yellow in color), then plug the other end of the cable into your computer’s Ethernet port.
  4. Plug the power adapter into an easily accessible wall outlet or power strip, then the DC power jack into the back of the router. If there is a power button, depress it to turn the router on.

Load the Software

1. Open your Web browser and enter http://192.168.0.1 in the address bar. This is the IP address of the router. A prompt for an administrator password should appear.
2. Log in to the interface:
Username: admin
Password: admin
3. Navigate to the System Tools menu and click the “Firmware Update” submenu.
4. Click the “Choose File” button and select the appropriate Commotion “factory” image for your TP-Link router. Make sure the router model number and version match!
5. Click the “Upgrade” button, and select “Yes” when the router asks you to confirm.
6. The router will reboot. Wait a few minutes, and then go to http://thisnode in your Web browser. If you see the Commotion screen, congratulations! You now have a Commotion wireless router!
You should continue to the Configure Commotion document next. It provides instructions on how to configure the Commotion software for the first time.

Definitions

Operating System
a collection of software that manages computer hardware resources and provides common services for computer programs. The operating system is a vital component of the system software in a computer system.
Firmware
the combination of persistent memory and program code and data stored in it. In other words, a very small and basic operating system for devices like appliances, computers, digital watches, digital cameras, mobile phones, and more.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s